top of page
O2-Messgerät für gelöster Anteil und Temperatur


Oxymeters-Thermometer, for dissolved oxygen measurement, saturation index and temperature.

The HD 2109.1 is a portable instrument with a large LCD display.
It measures the dissolved oxygen concentration in liquids (in mg / l), the saturation index (in%).

Thanks to an internal pressure sensor, the instrument performs the automatic compensation of the barometric pressure.
It offsets, in an automatic way, the permeability of the membrane of the oxygen probe and the salinity of the liquid under examination. The calibration function, fast, the dissolved oxygen probe guarantees lasting correctness of the performed measurements.

The probe of dissolved oxygen and temperature, equipped with an automatic recognition module, stores in its interior the factory calibration data. The HD2109.2 is a datalogger, it stores up to 18,000 samples of dissolved oxygen concentration, saturation index, barometric pressure and temperature that can be transferred to a PC connected to the instrument via the multi-standard RS232C serial port and USB 2.0 .

From the menu you can configure the storage interval, printing, and baud rate. The HD 2109.1 model is equipped with an RS232C serial port and can transfer in real time, the acquired measurements to a PC or to a portable printer. The Max, Min and Avg calculate the maximum, minimum and average.

Other functions include: the relative measurement REL, the Auto-HOLD function, and the automatic turning off.
The instrument has IP67 protection.

The kit includes:
– HD2109.1 instrument, calibrator DO9709 / 20, 4 1.5V alkaline batteries, operating manual, case and sofware DeltaLog9;
– Combined DO9709 SS probe for the measurement of oxygen and temperature with possibility of replacing the membrane. Cable length 2 meters. It includes probe, 3 membranes, zero solution, 200cc of electrolyte;
-Cable C.206 Serial connection with USB connector on the PC side connector and Mini Din 8-pin plug to the instrument.

measured quantities: mg / l O2, sat.% O2, mbar, ° C, ° F

Dimensions: (Length x Width x Height) 185x90x40mm
Weight 470g (complete with batteries)
Materials ABS
Display 2 × 4½ digits plus symbols
Visible area: 52x42mm

Operating conditions
Operating temperature -5 … 50 ° C
Storage temperature -25 … 65 ° C
Working relative humidity 0 … 90% RH, no condensation
Degree of protection IP67

Batteries 4 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries

Power absorbed with
instrument off 20μA
With oxygen probe
dissolved inserted 40μA
Network (SWD10) output network adapter 12Vdc / 1A

Security of stored data
Unlimited, independent of battery charge conditions

Date and time Schedule in real time
Accuracy 1min / month max departure

USB interface – model HD2109.2
Type 1.1 – 2.0 electrically isolated

input of oxygen and temperature probes 8-pole male DIN45326
serial interface and USB 8-pole MiniDin
network adapter 2-pole connector (positive in the center)
Measurement of dissolved oxygen concentration
measuring range 0.00 … 90.00mg / l
Resolution 0.01mg / l

(0 … 90%, 1013mbar, 20 … 25 ° C) ± 0.03mg / l ± 1digit

Characteristics of the oxygen probe DO9709 SS
type: Polarographic probe, Silver anode, Platinum cathode
Field of application
Oxygen Concentration: 0.00 … 60.00mg / l
Working temperature: 0 … 45 ° C
Accuracy instrument with probe 1% fs
membrane Replaceable
cable length 2m

1.576,00€ + shipping fees

bottom of page